Recent tips

Q&A series: Measuring up the facts, history, imperial verse, standard, and how to measure certain areas

How long have human used measuring such as a ruler, what were some early examples, how did thing change?

The use of measuring devices such as rulers dates back to ancient civilizations, such as the Egyptians who used rulers made of reeds, and the Greeks and Romans who used metal rulers. The metric system, also known as the International System of Units (SI), was officially adopted by France in 1795 and has since been widely adopted internationally. The standard system of measurement, also known as the British system or imperial system, was mainly used in Britain and its former colonies, including the US. The main difference between the metric and standard systems is that the metric system is based on multiples of 10, whereas the standard system is based on arbitrary units. The metric system is considered more logical and easier to use due to its decimal nature, whereas the standard system is still in use in some countries due to its historical significance and widespread use.


Which countries use the stadard system?

The standard system of measurement, also known as the British system or imperial system, is primarily used in the United States, the United Kingdom, and some of their former colonies. Other countries that still use the standard system include Liberia, Myanmar, and the Bahamas.

Asian countries

Most Asian countries use the metric system, also known as the International System of Units (SI), as their standard system of measurement. This includes countries such as China, India, Japan, South Korea, and many others. However, there may be some regional variations and local systems of measurement still in use in certain areas.

How to Measure certain standard areas

Enough facts, Jack, let’s get down to the nitty-gritty, how do you measure square footage?

Square footage

Square footage is a unit of area measurement that expresses the size of a two-dimensional space, such as a room, in terms of square units. To measure square footage, you need to determine the length and width of the space in feet and then multiply those values to find the total area in square feet. For example, if a room is 10 feet long and 12 feet wide, its square footage would be 10 x 12 = 120 square feet.

Measuring flooring, such as hardwood

Square footage is a unit of area measurement that expresses the size of a two-dimensional space, such as a room, in terms of square units. To measure square footage, you need to determine the length and width of the space in feet and then multiply those values to find the total area in square feet. For example, if a room is 10 feet long and 12 feet wide, its square footage would be 10 x 12 = 120 square feet.

Measuring tile

To measure for tile, the process is similar to measuring for hardwood flooring. You will need to determine the total square footage of the area you want to cover and take into account any irregular shapes, doorways, or other obstructions.

When measuring for tile, it is also important to consider the size of the tiles you want to use and how they will fit in the space. For example, if you have a smaller room, you may want to use smaller tiles to reduce the number of cuts required. Conversely, larger tiles may be a better option for larger spaces.

Once you have determined the total square footage, you should add an extra 10-15% to account for cuts and waste. Before ordering tile, it is always best to double-check the measurements to ensure you have the correct amount.

Measuring drywall

To measure for drywall, you will need to determine the total square footage of the wall space you want to cover. To do this, measure the length and height of each wall, in feet, and then multiply the two values to get the square footage for each wall.

Next, you need to take into account any openings, such as doors and windows, which will require cuts in the drywall. Make sure to measure the dimensions of these openings accurately and subtract the corresponding square footage from your total wall area.

Once you have the total square footage, you should add an extra 10% to account for cuts, waste, and any additional pieces that may be required. Before ordering drywall, it is always best to double-check your measurements to ensure you have the correct amount. Keep in mind that drywall also comes in different thicknesses and sizes, so make sure to choose the appropriate size for your project.

Fencing projects using standard size pickets

To measure for fencing using standard sized pickets, you will need to determine the total length of fencing required and the number of pickets needed. To do this, measure the length of the area you want to fence, in feet, and divide it by the width of a single picket to find the number of pickets required. For example, if you want to fence an area that is 100 feet long and each picket is 6 inches wide, you would need (100 x 12) / 6 = 200 pickets.

It is also important to consider any gates, corners, or other special configurations when calculating the number of pickets needed. Make sure to add extra pickets to account for any cuts, waste, or extra pieces required.

Before ordering pickets, it is always best to double-check your measurements and calculations to ensure you have the correct amount. Keep in mind that different types of fencing may have different requirements, so make sure to follow the manufacturer’s specifications for your specific project.

Concrete, for a driveway or patio

To measure for the number of concrete bags needed for a driveway or patio, you will need to determine the total volume of concrete required. To do this, measure the length, width, and depth of the area you want to pour, in feet. Then multiply these values to get the total cubic footage of the space.

Next, you need to convert the cubic footage to cubic yards, as concrete is typically sold by the cubic yard. To do this, divide the total cubic footage by 27 (the number of cubic feet in a cubic yard). For example, if you have a driveway that is 20 feet long, 10 feet wide, and 4 inches deep, the total cubic footage would be 20 x 10 x (4/12) = 80 cubic feet. To convert this to cubic yards, divide 80 by 27 to get 2.96 cubic yards.

Finally, you need to determine the number of bags of concrete needed to fill the volume you have calculated. This will depend on the size of the bags and the manufacturer’s specifications. Most bags of concrete come in either 40- or 60-pound bags and yield approximately 0.6 cubic feet of concrete per bag. To determine the number of bags needed, divide the total cubic yards by the yield of each bag.

Before ordering concrete, it is always best to double-check your measurements and calculations to ensure you have the correct amount. Keep in mind that different projects may have different requirements and mixing ratios, so make sure to follow the manufacturer’s instructions for your specific project.

Covering your homebase with baseboards

To measure for baseboards, you will need to determine the total length of baseboard needed for your project. To do this, measure the length of each wall where you want to install baseboards, in feet, and add the values together to get the total length.

It is important to take into account any corners, doors, or other obstructions that will require cuts in the baseboard. Make sure to measure the dimensions of these areas accurately and subtract the corresponding length from your total wall length.

Once you have the total length, you should add an extra 10% to account for cuts, waste, and any additional pieces that may be required. Before ordering baseboards, it is always best to double-check your measurements to ensure you have the correct amount. Keep in mind that different types of baseboards may have different lengths and sizes, so make sure to choose the appropriate size for your project.

Measuring carpet (hopefully not shag)

To measure for carpet, you will need to determine the total square footage of the floor space you want to cover. To do this, measure the length and width of each room, in feet, and then multiply the two values to get the square footage for each room.

Next, you need to take into account any closets, alcoves, or other areas that will require cuts in the carpet. Make sure to measure the dimensions of these areas accurately and subtract the corresponding square footage from your total room area.

Once you have the total square footage, you should add an extra 10% to account for cuts, waste, and any additional pieces that may be required. Before ordering carpet, it is always best to double-check your measurements to ensure you have the correct amount. Keep in mind that different types of carpet may have different widths, so make sure to choose the appropriate size for your project.

Different measurement dimensions require different tools to measure them. Here’s a quick summary:

There are several types of measuring tapes and rulers, including:

  1. Steel tape measure – a long, flexible tape with markings in inches or centimeters, used for measuring larger distances or around curves.
  2. Retractable tape measure – a compact, hand-held tape measure with a retractable blade and locking mechanism.
  3. Measuring wheel – a rolling device with a circumference marked in inches or centimeters, used for measuring large distances or lengths.
  4. Laser measure – a handheld device that projects a laser beam to measure distances or calculate area and volume.
  5. Digital tape measure – a tape measure with a digital readout, often with additional features such as memory storage and calculating capabilities.
  6. Ruler – a flat, straight object with markings in inches or centimeters, used for measuring short distances or making straight lines.
  7. Architect’s scale – a specialized ruler used by architects and engineers to make accurate drawings and measurements.
  8. Angle ruler – a ruler with protractor markings, used for measuring angles or making angled cuts.

Different types of measuring tapes and rulers are designed for different purposes and can be selected based on the specific requirements of your project. For a further breakdown of these tools, see the next post with a more detailed description and average cost.

About The Author